[dependabot]

Bumps filelock from 3.32.3 to 4.2.1.

Release notes

Sourced from filelock's releases.

4.2.1

• On a singleton wrapper, close> and close> end only the holds that tasks acquired through that wrapper. A reader that arrives during close() gets the closed error instead of joining the ending hold. After synchronous code closes or force-releases the shared lock, the wrappers refuse to admit readers into the ended hold, and close() on such a wrapper returns. Closing one wrapper no longer ends a task's nested hold taken through another wrapper on the same path. #832
• ReadWriteLock locks again after a release() that an exception from a signal handler interrupted. The async read-write wrappers stop admitting readers into such a level. The async read-write locks forget a hold whose backend release failed after the backend let go, and they free the memory of each acquire that times out or is canceled. AsyncFileLock returns from release() after a few hundred acquires gave up behind a waiting one. An exception from a signal handler delivered while an AsyncFileLock call joins its queue no longer blocks every later call on that lock. #833
• Fix ReadWriteLock acting on -journal, -wal or -shm files another process puts beside its database: a write could land in another file, a reader could get in beside a writer, and an acquire could fail. SQLite now opens the database by name only in a directory no other account can write, and through a private hard link elsewhere. On Windows the directory's access control list decides. Where hard links are unavailable, keep the database in a directory other accounts cannot write, such as one under %LOCALAPPDATA%. The lock removes link directories through a checked descriptor rather than by name, reads a link directory's name only when the locking account owns it, and leaves alone a directory with other content renamed onto a link directory's name. A database whose schema takes more than a few kilobytes to load raises ValueError instead of running past the acquire timeout. #834
• Fix five bugs in opening the lock file. UnixFileLock no longer truncates a file it did not create, such as one renamed to the lock path, and no longer applies mode to it. An on_acquired hook that writes holder metadata now truncates the file itself. A lease (Linux) or an oplock (Windows) on the lock file or a soft lock's marker no longer holds acquire() past its timeout or blocking=False, and an oplock no longer holds release(); ReadWriteLock on Windows waits for its timeout and raises Timeout. On Windows, a mode without group and other bits, such as 0o600, now creates the lock file with an owner-only permission list; the ReadWriteLock database gets the same. The soft locks' writability check no longer follows a symlink swapped in at the lock path. On a filesystem without flock, a contender from another account now waits on a marker it cannot write instead of raising PermissionError. #835
• Fix SoftFileLock, MarkerSoftFileLock and SoftFileLease removing a live holder's marker in three cases: the holder and the contender run in Linux time namespaces with different boottime offsets; only one of them can read the boot id; a process other than the owner rewrote the marker. Soft markers no longer carry group or other write bits. A process name containing a carriage return or another line separator no longer makes the stale check raise ValueError. When /proc/self/ns/time exists but cannot be read, the stale check no longer compares start times and keeps the marker. #836
• The async read-write locks record their hold under a task owner, so synchronous code on the executor thread that took the hold can no longer re-enter or release it. AsyncSoftReadWriteLock gives back one level on release, so synchronous readers of a shared singleton keep theirs. SoftReadWriteLock tracks read levels per thread: release() from a thread that holds none raises RuntimeError. After its heartbeat recorded a lost hold, it refuses new acquires until that hold is released. #838
• StrictSoftFileLock creates <path>.filelock and its claims directory with the lock's mode and sets the sticky bit (a directory flag that lets only a file's owner remove it) on both. On the next acquisition it narrows a directory it owns that an earlier release created wider; it leaves a directory of another account as it is, so remove such leftovers by hand. It reaches claims through a descriptor opened without following symlinks; on Windows it holds both directories open and refuses a junction (a directory that points at another directory). Under a sticky parent such as /tmp it refuses a coordination directory of another account, as SoftReadWriteLock does for <path>.rw. One read grace now covers a whole claim scan, a failed claim cleanup no longer leaves the sentinel descriptor open, and a non-regular node at a sentinel private-record name raises SoftFileLockProtocolError. On Windows, contenders read claims without blocking their owner's unlink. #839

... (truncated)

Changelog

Sourced from filelock's changelog.

########### Changelog ###########

.. towncrier-draft-entries:: Unreleased

.. towncrier release notes start

---

4.2.4 (2026-10-19)

---

• Keep GitHub Release notes free of extra blank lines while retaining the PyPI and version comparison links. :pr:863

---

4.2.3 (2026-10-19)

---

• Creating a lock on a Python 3.15 interpreter without types.LazyImportType no longer triggers AttributeError at exit. :pr:860
• Handle EFTYPE when a no-follow open refuses a symlink in a soft reader/writer lock's protocol tree, so heartbeat reports lost ownership rather than a transient refresh error.

---

4.2.2 (2026-10-18)

---

• Fix a lock on a relative path that stayed held after a later with lock: ended, when an earlier acquire() had failed because the working directory no longer exists. That call still raises :class:FileNotFoundError, and it now leaves the lock's hold count unchanged. :pr:856

---

4.2.1 (2026-10-17)

---

• On a singleton wrapper, :meth:AsyncReadWriteLock.close() <filelock.AsyncReadWriteLock.close> and :meth:AsyncSoftReadWriteLock.close() <filelock.AsyncSoftReadWriteLock.close> end only the holds that tasks acquired through that wrapper. A reader that arrives during close() gets the closed error instead of joining the ending hold. After synchronous code closes or force-releases the shared lock, the wrappers refuse to admit readers into the ended hold, and close() on such a wrapper returns. Closing one wrapper no longer ends a task's nested hold taken through another wrapper on the same path. :pr:832
• :class:~filelock.ReadWriteLock locks again after a release() that an exception from a signal handler interrupted. The async read-write wrappers stop admitting readers into such a level. The async read-write locks forget a hold whose backend release failed after the backend let go, and they free the memory of each acquire that times out or is canceled. :class:~filelock.AsyncFileLock returns from release() after a few hundred acquires gave up behind a waiting one. An exception from a signal handler delivered while an :class:~filelock.AsyncFileLock call joins its queue no longer blocks every later call on that lock. :pr:833
• Fix :class:~filelock.ReadWriteLock acting on -journal, -wal or -shm files another process puts beside its database: a write could land in another file, a reader could get in beside a writer, and an acquire could fail. SQLite now opens the database by name only in a directory no other account can write, and through a private hard link elsewhere. On Windows the directory's access control list decides. Where hard links are unavailable, keep the database

... (truncated)

Commits

• 60331bb Release 4.2.1
• 834bf13 🧪 test(soft): skip Unix pin test on Windows
• 9d15e38 fix(soft-rw): isolate subclass singleton registries (#855)
• e1e825b 🐛 fix(open): keep lock files intact, honor deadlines and mode (#835)
• 5e3f2ec 🐛 fix(read-write): keep SQLite off shared names, bound schema (#834)
• bfa066d 🐛 fix(strict): keep claim directories private to the lock (#839)
• 977d2c3 🐛 fix(soft): wait on an empty marker instead of evicting (#846)
• 740ff66 🐛 fix(soft): break stale markers without emptying the lock path (#843)
• 86c6d5f 🐛 fix(async): honor cancellation and per-thread gates (#844)
• eeceaa8 🐛 fix(soft): keep live holders when owner identity differs (#836)
• Additional commits viewable in compare view

Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting @dependabot rebase.

---

Dependabot commands and options

You can trigger Dependabot actions by commenting on this PR:

• @dependabot rebase will rebase this PR
• @dependabot recreate will recreate this PR, overwriting any edits that have been made to it
• @dependabot show <dependency name> ignore conditions will show all of the ignore conditions of the specified dependency
• @dependabot ignore this major version will close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this minor version will close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)
• @dependabot ignore this dependency will close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)

[nerveai]

Nerve PR review · ✅ Ready to merge

filelock 3.32.3 → 4.2.1 (major, transitive: memu-py → lazyllm → filelock). Nerve never imports filelock, and memu loads lazyllm only for its lazyllm_backend (memu/app/service.py:120). Nerve's memU bridge configures client_backend: "sdk", so this code is installed but never runs. The only breaking change in 4.0.0 is the on-disk protocol of SoftReadWriteLock. lazyllm uses FileLock, Timeout and SoftFileLock, which 4.0.0 leaves unchanged. The bump fixes GHSA-v4x8-3wr5-3wq8 (high) plus GHSA-9vhv-jxww-xfm5 and GHSA-567q-5qvw-pf92 (low). All three are in ReadWriteLock and Windows soft-lock paths that Nerve does not reach. Both artifacts match their PyPI hashes. No other open PR touches filelock. The PR merges cleanly into current main.

Completeness: lock-only change. uv.lock revision goes 3 → 5 because Dependabot's uv is newer. CI's pinned uv 0.12.0 accepted the lock under uv sync --locked, and Backend tests, Frontend build and Frontend install floor all pass.

_{Checked: dep_diff of main vs the trial merge at bbf38ad; registry integrity; GHSA ranges; filelock 4.0.0–4.2.1 release notes; lazyllm import sites in the locked memu-py 1.4.0. Not run in the offline sandbox, which only has main's deps, so I relied on CI. · automated review by nerveai — mention @nerveai to ask a follow-up.}